CS802T IN CEILING SPEAKERS
Asia Market Exclusive
The Audiofrog CS802T includes an 8” polypropylene woofer cone and 1” tweeter with a 1.7 kHz crossover for smooth frequency response at the crossover at all listening angles. A passive acoustic equalizer smooths and extends the tweeter’s high frequency response.
Standard 8 ohm and 70/100V operation can be selected prior to installation and four switch-selectable transformer tap positions provide the ability to manage power delivery when several speakers will be connected to the same amplifier.
Installation is simple and straightforward. The mounting depth behind the baffle has been kept to a minimum so fitment in ceiling and wall locations is assured. Spring loaded mounting tabs accessed from the front make securing the speakers simple and reliable. Unobtrusive paintable grilles are secured with powerful neodymium magnets.
- 1” Coated Aluminum Dome Tweeter
- 8” woofer with polypropylene cone, rubber surround and vented basket
- Integrated crossover network
- Transformer for use with 70V/100V amplifiers
- Paintable low profile grille secured with magnets
- Spring-loaded mounting tabs easily secure the speaker to the baffle using #2 Philips screwdriver
Woofer
- 8” polypropylene cone
- 1” copper voice coil
Tweeter
- 1” Coated aluminum diaphragm
- Neodymium magnet
- Passive acoustic equalizer
Crossover
- 1.7 kHz 12dB/octave passive high pass and low pass filters
- 8 Ohm or 70V/100V selection jumper
- 70V taps for 20W, 10W, 5W and 2.5W settings
- 100V taps for 40W, 20W, 10W and 5W settings
Performance
- Power Handling (Continuous Average): 50 Watts
- Power Handling (Music): 100 Watts
- Nominal Impedance: 8 Ω
- Sensitivity (2.83 V / 1 M): 87 dB
- Frequency Response (-3 dB): 40 Hz – 20 kHz
- Recommended Amplifier RMS Power: 10 – 100 Watts
- 70V/100V/8 Ω operation selectable via jumper
Frequency Response Graph
Impedance Graph
