GB10OE-0002: TOYOTA/UNIVERSAL 1″ (25 MM) AUDIOPHILE GRADE AUTOMOTIVE TWEETER

Audiofrog OE style tweeters provide the same performance as the aftermarket versions, but the aftermarket housings have been replaced by a custom mount designed to fit directly in the location provided by the factory.  Please check the GS10OE-0002 installation manual for a detailed drawing with dimensions

In the box:
One pair GB10OE-0002 tweeters

One pair connecting cables

One pair mounting plates

Disclaimer:

Please check the drawings in the manual and pictures here against your original tweeter to better ensure the Audiofrog tweeter will fit. We reverse engineer the original tweeter when we design the Audiofrog version and cannot verify every make, model and year that this tweeter may fit. You can download the instruction manual below.

GB10OE-0002 Instruction Manual.pdf

• 1” (25 mm) Sealed Polyester Diaphragm
• 1” (25 mm) Voice Coil
• Neodymium Motor
• Copper Inductance- and Distortion-Reducing Pole Piece Cap
• Removable and Paintable Grill

Specifications:

• Nominal Impedance: 4 Ω
• RMS Power Handling: 100 W (with recommended crossover)
• Peak Power Handling: 300 W (with recommended crossover)
• Frequency Response (-3 dB): 1.8 kHz – 24 kHz
• Sensitivity (2.83V / 1M): 90 dB
• Recommended Amplifier RMS Power Range: 20 W – 100 W
• Recommended High Pass Filter Frequency and Slope: ≥ 2.5 kHz, ≥ 12 dB/oct

Frequency Response Graph:

GB10OE-0002 Tweeter Instruction Sheet

GB Tweeter Owner’s Manual